Tlačiť

STN EN ISO 13385-2


Označenie: STN EN ISO 13385-2 zrušená
Slovenský názov: Geometrické špecifikácie výrobkov (GPS). Meradlá dĺžok. Časť 2: Posuvné hĺbkomery. Konštrukcia a metrologické požiadavky (ISO 13385-2: 2011)
Anglický názov: Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
Pôvodné označenie:
Dátum vydania: 1. 10. 2011
Dátum zrušenia: 1. 11. 2020
Jazyk: EN
ICS: 17.040.30
Triediaci znak: 99 2011
Úroveň zapracovania: idt EN ISO 13385-2:2011, idt ISO 13385-2:2011
Vestník: 09/11
Poplatok: Tlačená verzia: 14,10 € 


Elektronická verzia
  1. Bez možnosti tlače, prenosu textu a obrázkov: 12.69 €
  2. Bez možnosti tlače, s prenosom textu a obrázkov: 14.10 €
  3. S možnosťou tlače, prenosu textu a obrázkov: 18.33 €
Vestník harmonizácie:
Nariadenie vlády:
Zmeny:
Nahradzujúce normy: STN EN ISO 13385-2:2020-11 (99 2011)
Nahradené normy:
Poznámka vo Vestníku:
Predmet normy:



Obsah normy STN EN ISO 13385-2
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Design characteristics
4.1 General design and nomenclature
4.2 Dimensions
4.3 Types of indicating devices
4.4 Measuring faces
5 Metrological characteristics
5.1 General
5.2 Effect of slider locking
5.3 Maximum permissible error of indication (limited by MPE)
5.4 MPE and MPL for a number of metrological characteristics
6 Indication in product documentation and data sheets
7 Proof of conformance with specifications
7.1 General
7.2 Measurement standards for the calibration of metrological characteristics
8 Marking
Annex A (informative) Error tests
Annex B (informative) Advice on application
Annex C (informative) Data sheet (example)
Annex D (informative) Calibration of metrological characteristics
Annex E (informative) Relation to the GPS matrix model
Figure 1 — Example for a design of a calliper depth gauge (slider with locking screw)
Figure 2 — Example of an analogue indicating device with vernier scale
Figure 3 — 0,1 vernier scale of length 9 mm
Figure 4 — 0,02 vernier scale of length 49 mm
Figure 5 — Standard slider with vernier scale
Figure 6 — Slider with vernier scale for readings without parallax error
Figure 7 — Example of analogue indicating device with circular scale
Figure 8 — Example of digital indicating device with digital display
Figure A.1 — Test arrangement for partial surface contact error
Bibliography