Tlačiť

STN EN ISO 12631


Označenie: STN EN ISO 12631 zrušená
Slovenský názov: Tepelnotechnické vlastnosti závesných stien. Výpočet súčiniteľa prechodu tepla (ISO 12631: 2012)
Anglický názov: Thermal performance of curtain walling - Calculation of thermal transmittance (ISO 12631:2012)
Pôvodné označenie:
Dátum vydania: 1. 1. 2013
Dátum zrušenia: 1. 2. 2018
Jazyk: EN
ICS: 91.120.10
Triediaci znak: 73 0707
Úroveň zapracovania: idt ISO 12631:2012, idt EN ISO 12631:2012
Vestník: 12/12
Poplatok: Tlačená verzia: 21,40 € 


Elektronická verzia
  1. Bez možnosti tlače, prenosu textu a obrázkov: 19.26 €
  2. Bez možnosti tlače, s prenosom textu a obrázkov: 21.40 €
  3. S možnosťou tlače, prenosu textu a obrázkov: 27.82 €
Vestník harmonizácie:
Nariadenie vlády:
Zmeny:
Nahradzujúce normy: STN EN ISO 12631:2018-02 (73 0707)
Nahradené normy: STN EN 13947:2007-04 (73 0707)
Poznámka vo Vestníku:
Predmet normy:



Obsah normy STN EN ISO 12631
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and units
3.1 Terms and definitions
3.2 Symbols and units
3.3 Subscripts
3.4 Superscripts
4 Geometrical characteristics
4.1 Main principles
4.2 Internal depth
4.3 Boundaries of curtain wall structures
5 Cut-off planes and partitioning of thermal zones
5.1 Rules for thermal modelling
5.2 Cut-off planes of the geometrical model
6 Calculation of curtain wall transmittance
6.1 Methodologies
6.2 Single assessment method
6.3 Component assessment method
6.4 Thermal transmittance of a curtain wall built of different elements
7 Input data
8 Report
8.1 Section drawings
8.2 Overview drawing of the whole curtain wall element
8.3 Values used for calculation
8.4 Presentation of results
Annex A (informative) Guidance for calculating the thermal transmittance Ucw of curtain walling using the two methods
Annex B (informative) Linear thermal transmittance of junctions
Annex C (normative) A method for calculating the thermal effect of screws using a 2D numerical method and the procedures specified in ISO 10077-2:2012
Annex D (normative) Ventilated and unventilated air spaces
Annex E (informative) Component method: Calculation example
Annex F (informative) Single assessment method: Calculation example
Annex G (normative) Parallel routes in normative references
Bibliography
Figure 1 — Principle of curtain walling construction: unitised construction
Figure 2 — Principle of curtain walling construction: stick construction
Figure 3 — Internal and external developed area, internal depth
Figure 4 — Boundaries of a representative reference element of a façade
Figure 5 — Areas with different thermal properties
Figure 6 — Thermal section representing the full curtain wall
Figure 7 — Definition of the areas
Figure 8 — Example 1: Framed curtain wall
Figure 9 — Example 2: Structural silicone glazing
Figure 10 — Example 3: Structural glazing
Figure 11 — Example 4: Rain screen
Figure 12 — Illustration of the glazed area and perimeter
Figure 13 — Illustration of the various areas on mullion or transom sections, panels and glazing
Figure 14 — Illustration of the various areas on frame-sash sections and glazing
Figure 15 — Illustration of a window integrated in a transom or mullion section