|
Označenie:
|
TNI CEN/TR 17079
|
|
Slovenský názov:
|
Navrhovanie kotvenia do betónu. Redundantné nenosné systémy
|
|
Anglický názov:
|
Design of fastenings for use in concrete - Redundant non-structural systems
|
|
Pôvodné označenie:
|
|
|
Dátum vydania:
|
1. 2. 2019
|
|
Dátum zrušenia:
|
|
Jazyk:
|
EN
|
|
ICS:
|
21.060.01, 91.080.40
|
|
Triediaci znak:
|
73 1253
|
|
Úroveň zapracovania:
|
idt CEN/TR 17079:2018
|
|
Vestník:
|
01/19
|
|
Poplatok:
|
Tlačená verzia:
9,70 €
Elektronická verzia
- Bez možnosti tlače, prenosu textu a obrázkov: 8.73 €
- Bez možnosti tlače, s prenosom textu a obrázkov: 9.70 €
- S možnosťou tlače, prenosu textu a obrázkov: 12.61 €
|
|
Vestník harmonizácie:
|
|
|
Nariadenie vlády:
|
|
|
Zmeny:
|
|
|
Nahradzujúce normy:
|
|
|
Nahradené normy:
|
|
|
Poznámka vo Vestníku:
|
|
|
Predmet normy:
|
1.1 General This Technical Report provides design rules for fasteners used to connect statically indeterminate non-structural light weight systems (e.g. suspended ceilings, pipe work, ducting) to concrete members such as walls or floors (see Figure 1)). The proposed design model may be applied to post-installed mechanical and bonded anchors covered by EN 1992-4:2017, 1.2. Their suitability will be confirmed in a European Technical Product Specification. The design rules assume the following: - under extreme conditions (e.g. large crack width) excessive slip or failure of a fastener might occur; - elements or systems are attached with at least three fixing points with one or more fasteners at each fixing point; - where more than one fastener is used at a fixing point (MF, see Figure 1)
|