STN EN 12516-1+A1
Označenie: | STN EN 12516-1+A1 |
Platnosť: | Platná |
Počet strán: | 203 |
Jazyk: |
EN
|
Listinná verzia: | 36,30€ |
Elektronická verzia: |
a) Bez možnosti tlače, prenosu textu a obrázkov:
32,67€ b) Bez možnosti tlače, s prenosom textu a obrázkov: 36,30€ c) S možnosťou tlače, prenosu textu a obrázkov: 47,19€ |
Slovenský názov: | Priemyselné armatúry. Pevnostný návrh plášťa. Časť 1: Postup zostavovania tabuliek pre plášte oceľových armatúr |
Anglický názov: | |
Dátum vydania: | 01. 03. 2019 |
Dátum zrušenia: | |
ICS: | 23.060.01 |
Triediaci znak: | 13 3022 |
Úroveň zapracovania: | idt EN 12516-1:2014+A1:2018 |
Vestník: | 02/19 |
Zmeny: | |
Nahradzujúce normy: | |
Nahradené normy: | STN EN 12516-1:2016-06 (13 3022) |
Poznámka vo Vestníku: | |
Predmet normy: | This European Standard specifies the tabulation method for determining the wall thickness of valve bodies, bonnets and covers with essentially circular cross-section made in forged, cast or fabricated steel. For valve shells with oval, rectangular or non-circular shapes, see 8.6. The range of PN or Class designations for which thicknesses are tabulated is: PN 2,5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, PN 160, PN 250, PN 320, PN 400, Class 150, Class 300,Class 600, Class 900, Class 1 500, Class 2 500, Class 4 500. Pressure/temperature ratings are specified for each material group for the above PN Standard Class and Special Class designations. The non-destructive examination procedures and acceptance levels that need to be applied to the valve shell components in order for the valve to be used at Special Class pressure/temperature ratings are defined. Details are also given for the alternative rules for small bore valves of DN 65 and smaller designated as Limited Class. |